i added one and made the post cleaner.

i've seen this question everywhere, so i figured i'd go all out.

 

ya thats where i ran my thru on my 08 screw, but u do know u could have cut the tape and actually went thru the grommet like its supposed to be used hahaha. I mounted my amps behind my rear seat so they are completly out the way.

 

Yeah, I'm wiring another amp with 4 gauge wire so i'm going to buy abnew grommet, and put everything thru it.

 

Great post, and great info. i will be doing the same setup in my 06. thanks everyone!

 

There's some good info here.

Glad you know how to use the search function on the site!

 

I am a lurker...

 

Looks like y'all all have great ideas for running wires but I figured I would show mine. I ran my wires from the battery and followed a big bundle of wires to the driver side to a grommet and slid the wire into the cab. I then took out the center console and ran the wire underneath the flooring to the backseat. I then mounted a piece of plywood to the back wall and mounted my amp to it. All of my cables are 100% concealed and (fingers crossed) this has been the most reliable part of my truck.