Hadmy truck aligned a while back. Everything was kosher. Now,I am noticing bad wear on my tires. It looks as if the camber is off,inside wearing. But,the outer edge is wearing at a faster pace. My truck is also shaking like a ***** in church. I looked today at work,nothing visually wrong. What could it be? My tires are original,with 92k miles. I was hoping to get another 10-12k out of them. The center tread is still good,so I am bummed.

 

if the tire pressure is low it will cause the tires to wear down the outsides of the tire

 

92,000 miles!? wow. I'd say you've had a good run with those. I had the same problem with wear on mine and it was a combo of a leaky tire(that i'd run too low on occasion). Lots of steering wheel shake from bad wear as a result.

I was also at 4wheel parts today getting my new tires put on and I mentioned I wanted an alignment because I was unsure if the alignment I had done after having my 2.5 inch leveling kit put in was done correctly. He asked if I had installed longer cam bolts when doing the alignment as it's necessary to accurately align after the lift. I had never heard of the cam bolts being mentioned but I had them put them on as he says it was needed. Don't want to trash my new shoes!

 

holy **** i thought you died motard! welcome back. how are the tie rods? did u feel anything or just look?

 

you must have tires like the Flintsones did

 

i was thinking the same thing. haa

 

this is an old thread from back in August, he's still not around.

 

I'm guessing he had to get his front end rebuilt. Control arms only last about 75K.

 

huht hunt...he said tard

 

do you rotate your tires on a regular basis..