Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

Adding to a 2.5 leveling kit

Thread Tools
 
Search this Thread
 
Old Jan 25, 2012 | 12:14 PM
  #1  
20triton07's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2012
Posts: 29
Likes: 0
Default Adding to a 2.5 leveling kit

Ok so I have a day star 2.5 inch leveling kit and 33 inch nitto terra grapplers on my 2007 f150 lariat. I really want just a little bit more of a lift off of the ground. Is there anything I can do to get another inch or so without having to replace my leveling kit?
Reply
Old Jan 25, 2012 | 12:22 PM
  #2  
masmith1553's Avatar
Senior Member
 
Joined: Jun 2010
Posts: 132
Likes: 10
From: Houston, Texas
Default

You can do an add a leaf in the rear, but I don't think you can change the front height without replacing the leveling kit.
Reply
Old Jan 25, 2012 | 12:26 PM
  #3  
20triton07's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2012
Posts: 29
Likes: 0
Default

Yeah I might end up doing that. I wish I had gotten I lift kit or even a body lift then put some 35's on it haha. But I might do that in the future. Thanks!
Reply
Old Jan 25, 2012 | 12:32 PM
  #4  
f150country's Avatar
Member
 
Joined: Jan 2012
Posts: 56
Likes: 0
Default Adding to a 2.5 leveling ki

I'm looking to do the same thing to my 2004 FX4 mine has a 2.5" leveling kit and I'm thinking about putting a rough country 4" lift kit for a total of 6.5" but i may take the leveling kit off though depends
Reply
Old Jan 25, 2012 | 12:43 PM
  #5  
masmith1553's Avatar
Senior Member
 
Joined: Jun 2010
Posts: 132
Likes: 10
From: Houston, Texas
Default

Since I don't have a brush guard my truck isn't "level". It is actually 0.5" higher in the front now. I should have just got the 2" leveling kit.
Reply
Old Jan 25, 2012 | 01:02 PM
  #6  
f150country's Avatar
Member
 
Joined: Jan 2012
Posts: 56
Likes: 0
Default

I'm gonna get a Ranch Hand Brush Guard for mine when the time comes
Reply
Old Jan 25, 2012 | 01:07 PM
  #7  
KingRanch4Life's Avatar
"Lifted"
iTrader: (2)
 
Joined: May 2011
Posts: 10,335
Likes: 223
From: Georgia
Default

Originally Posted by 20triton07
Yeah I might end up doing that. I wish I had gotten I lift kit or even a body lift then put some 35's on it haha. But I might do that in the future. Thanks!
You will be able to clear 35's with the 2.5 level. That's what I have and 35's fit just fine.... Check out Zone, BDS, and Rancho... They have 4" lifts for very decent prices...
Reply
Old Jan 25, 2012 | 01:14 PM
  #8  
f150country's Avatar
Member
 
Joined: Jan 2012
Posts: 56
Likes: 0
Default

Yeah that's true I've checked on alot of those websites and they do have a some good lift kits definitely good options
Reply
Old Jan 25, 2012 | 01:31 PM
  #9  
20triton07's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2012
Posts: 29
Likes: 0
Default

Originally Posted by KingRanch4Life

You will be able to clear 35's with the 2.5 level. That's what I have and 35's fit just fine.... Check out Zone, BDS, and Rancho... They have 4" lifts for very decent prices...
Do the 35's rub at all? And I like to have some space between the body and the tires. But that's good to know. Thanks
Reply
Old Jan 25, 2012 | 01:36 PM
  #10  
jerrybizzle's Avatar
Jerry
 
Joined: Oct 2011
Posts: 1,473
Likes: 32
From: meridian, idaho
Default

Originally Posted by 20triton07
Do the 35's rub at all? And I like to have some space between the body and the tires. But that's good to know. Thanks
4wd? Can't tell from the pic. If so, 35s shouldn't be a problem.
Reply



All times are GMT -4. The time now is 12:31 AM.