same here. That flex had me puzzled for a while.

 

So has anyone done this with the tailgate step? Does the step get in the way of mounting the actuator? I am considering doing this but want to be sure before I go ahead and take the tailgate apart.

 

Did mine a couple weeks ago and no problem with the tailgate step, easy peasy.

Good luck.

Jeff

 

Thanks this might be on the agenda for Sunday depending on how my buddys move goes Saturday.

 

Have a 2013 lariat scab and I'll dipped if I can find the lock and unlock wires in the trough on the drivers side HELP

 

I have the '13 Scab as well. I found them in the passenger side. Did you try there?

 

No I didnt since Pop and Lock said drivers side
Do you remember the wire colors?
I appreciate your suggestions !!

 

the '13s should be purple/white and grey/brown. reverse if the polarity it wrong (locks when should unlock etc)

 

Like Ian said, the gray/brown is one. I couldn't get the purple/white to work but I can't remember what the other wire was (I think it was the light blue/green). I do know that I tried many wires to unlock on the second push of the button but never did find the right combination. If you figure that out, please let us know.

 

With a backup camera in the tailgate they get real expensive. I added a Gate Keeper to slow a thief down. Means they have to bring one more tool and spend a few minutes taking it off...

http://www.jimmijammer.com/Product,%20GK.htm

I also added the Light Keeper...need a very specific tool to remove

http://www.jimmijammer.com/Product,%...t%20Keeper.htm