I like the Start My Car website for fuse diagrams. They don't always have the diagram for a vehicle I might be looking for but in this case I found them.

https://www.startmycar.com/us/ford/f...o/fusebox/2013

 

That is exactly where I went for the fuse info.

 

me 3!

 

Logged the website now myself….good info is always good

 

Nothing new, still a slight miss at idle but have not had the issue described above again. Not sure how to diagnose the miss, nothing shows under Forscan. I need to do a leak down test.

 

Happened again today for the first time since my posting. No CEL on dash while happening or any stored DTC's. I guess its back to changing relay's, since changing the main one in the kick panel area offered no changes.

I ran some tests in Forscan, like injectors and some voltage items and all checked out operational. Gonna assume if it is fuel related, that it would throw a code?

 

All my VCT's OHM at 8.5, all in spec.

 

Driving on the freeway about 70 MPH and the truck started acting up. AC went out, blowing hot only, and the truck felt like we were driving over rumble strips or dots in the road. After about a minute or so, all returned to normal!

Then as we approached our destination, the truck started acting up again and threw a CEL! In the parking garage I put on my scanner and it pulled a P0352! This was good news, something to go on. So when I got back home, I realized that this was a cylinder that I had an issue with the connector when I did plugs. So I snipped off the connector, installed a new one and erased the code(s).

Hopefully this will be the answer! Fingers crossed.

 

It’s been 3 days now …. Any update?

 

so far nothing major. A few small misses, I’m thinking maybe time for new coils. But I still need to do my leak down testing. Thanks for asking!