Anybody know how to remove this dash panel in order to access/replace the interior lights dimmer switch and headlight switch. The panel, on dash left o

f steering wheel, seems to be a molded piece with the dash, so not too clear how to remove it. Thanks

 

 

May help to have some plastic interior trim removal tools but yea as posted it just pops right out.

 

Thanks, but the trim piece in the video is different than the one I have. I wish it was as easy as that. Mine is molded with the edge of the dash, so not sure how to get it out.

 

There is a small opening in the top right corner of that little dimmer switch panel. Since your dash appears to be molded one piece, I have a feeling both the dimmer and headlight switch just pop out of the dash toward the seat using trim removal tools. Grab something thin like maybe a butter knife and try to pop them out. Put masking tape on it so as to minimize scratching the plastic.

 

That's right I remember seeing a post about some model trims have molded dashes like that. I'm not with my truck right now but isn't there a removable panel on the side of the dash where the door rests? Or try going from underneath?

 

2011 XLT Screw 4x4 3.5l 3:55LS



Looks like time to open all the doors and turn a leaf blower loose on all that dust!

 

Thanks, that was the key. There is a vent panel on the side which just pops off and then I could reach in there to pop out the dimmer switch and face plate. Easy!

 

Yup that's the one I was thinking about! Glad you got it worked out. Thanks @Barry_Vee for the photos.