I have a couple sets of aftermarket wheels and the OEM lug nuts won't fit inside. Which ones should I replace them with? Preferably black ones for my BMF Wheels. The base of the oem lug nuts are too fat.

 

Gorilla

 

Thank you, I didn't know the specific thread they needed to be or anything. I did searches and couldn't come up with actual lug nuts just tons of posts about wheels haha.

 

I went with these Gorilla one-piece lug nuts & lock nut & they look great on my 2022. Check sizing for your year F150 but these seem like good quality compared to stock.

As noted below by another member:

2014 and earlier use 14x2
2015+ uses 14x1.5

 

So, is the thread 14x2.00 or 14x1.50?

above pics show both!

 

Both photos I posted, as well as the size when I called McGard & a local Gorilla dealer, was 14 x 1.5 for my 2022.

 

Post #2 shows, 14x2.00 !

my point being, with 2 different thread sizes stated, could be confusing/mis-leading to the OP as to which thread is correct.

 

Problem is, this is the 09-14 forum, where the lugs should be 2.0. So, you dredged up an old thread about different trucks than yours.

 

Both pics I see show 14x1.5.

'14 and earlier use 14x2
'15+ uses 14x1.5

 

Thread bumper needs to disable infinity scroll. It can lead to confusion and bickering.



why is it a thing on here anyways? It seems to only create confusion