DrillRig52

Be been doing a lot of research figuring out what type of small lift I want to go with. I've figured out what I want but have yet to come across a pic with the exact specs.
Bilstiens set at the 1.75" setting (middle)

Pro comp AAL (long style) in the rear with the factory block removed.

And if possible 275/70/18 KO2s

Truck is a 2012 FX4

4.6Intruder

2011 XLT 4x4 Bilstein 5100 at second from top setting(1.5"), rear block removed with pro comp aal. I 285/75r17's though or 34x11x17.

DrillRig52

Nice! Does it still have a slight take in the front? I will be towing occasionally and don't want to be nose high.

eyecandynsx

Do you think 35's would fit if it was in the highest setting? How much does the AAL leaf add over the stock block?

Black_platinum

2.5"/3" level with 1" BL an 35"x12.5x20

4.6Intruder

Yeah I still have slight rake to the front. About 1" of rake. The stock block is 1.25" and the AAL's offer around 1.5" to 2". I got 2 inches out of the AAL which gave me my 1" rake. Had I left the block in there it would of had over 2 inches of rake which I did not want.

4.6Intruder

I think 35's would fit at the highest setting depending on wheel offset/width. There would be trimming involved and pulling the inner fender back to clear though. In order for me to clear with my wheel and tire size I had to trim the front valence and pulled back the rear of the inner fender with a zip tie to clear full lock to lock.

Brett2013fx4

305x70x18 on stock wheels with a 2.5" AS spacer and stock block. I'll be putting in 3" blocks soon hopefully. I'll be getting some 2" bora spacers in 2 weeks so I can have em poke out a little more. No rubbing at all

DrillRig52

Nice, that's exactly what I'm looking to achieve. Thanks buddy.