I've got a 2014 Platinum and when I start the truck the information screen is not on the screen I had left it on when I turned the truck off. Under menu settings I've got the memory on selected. Is there something that I'm missing?

 

An open owners manual?

.

 

Settings
Vehicle
Autolamp Delay
Off or XXX seconds
DTE Calculation (distance to empty)
Normal history used
Towing history used
Easy Entry/Exit
On or Off
Locks
Autolock
On or Off
Autounlock
On or Off
Unlocking
One Stage or Two Stage
Menu Control
Standard or Memory On
Oil Life Reset
Set to XXX% (Hold OK to Reset)
Pwr Running Boards
Auto, Off or Out

This was in the "open manual" you speak of. Thanks anyway, you've been so helpful.

 

Does the concept of actually READING the manual elude you?

Not an open manual, a manual you open. There are no Cliff notes. I help those that actually show an intent to help themselves, I'm not seeing that here.


.

 

I thought that was the whole purpose of this forum, to help people. Why do you waste your time to reply if you're not going to help?

 

Careful Coastline, he'll put you on his "Ignore List"! Lol...

 

That's what he should have done to start with if he didm't wan't to answer my question.

 

oh geez, here we go again

 

Have you tried turning the memory feature off to see what happens?

 

Yes I tried that. I think I got it figured out though. It was set on the trailer screen and apparently it thought a trailer was still attached to the truck. So every time I started the truck that same screen came up. I disabled the trailer and all is well again.