Forscan applications
#3731
Member
Thread Starter
Do not check the demo box. That puts it into demonstration mode.
.
.
#3733
What adapter did you get? If it's switched, I assume you tried it with the switch both ways? You want to start it in HS-CAN mode. It'll ask you to switch to MS-CAN when it's ready to scan that bus.
#3734
The FORScan Guy
I've mapped out what should be a complete listing of the BCM & IPC for 2009-14 F150s here if anyone is interested: https://docs.google.com/spreadsheets...it?usp=sharing
#3735
Member
Thread Starter
I've mapped out what should be a complete listing of the BCM & IPC for 2009-14 F150s here if anyone is interested: https://docs.google.com/spreadsheets...it?usp=sharing
.
#3736
Senior Member
It doesn't. I tried a long time ago based on some other vehicle info. It was the same spot. I checked my notes when I saw that and was sad.
The following users liked this post:
digitaltrucker (12-03-2018)
#3737
Member
Thread Starter
.
Last edited by RLXXI; 12-03-2018 at 08:00 PM.
#3738
Senior Member
#3739
Senior Member
Ooh, does Panic Feature Activation Type: 0=disabled, 1=hold, 2=pulse, 3=double mean what I think? I would love to change that to double press to avoid pocket activations. I'll have to try that out.
#3740
Waiting to see detailed breakdown on the APIM, but might it be possible to adjust the volume "steps"?
My F150 uses about 4 clicks on the radio to cover the same range of volume levels than my Taurus does with 10 clicks.
My F150 uses about 4 clicks on the radio to cover the same range of volume levels than my Taurus does with 10 clicks.