Guys you would never believe what showed today... MY TRANSFER CASE



I'm kinda cleaning it up a little,
i cleaned up the shop some. Theres so many parts everywhere, i've gotta get organized

also got some aluminum in for some plates for the rocks



drew up the brackets



alright guys let me here some opinions... what do ya'll think about me put some kc's were the fog light holes are

 

yes on the KC's...

 

Thumbs up on the KCs as well.

 

yes on the KCs, and that took long enough to get that transfer case. Happy to see ya finally got it though.

 

Yes on the KCs. Stop wasting time online, build that truck!

 

Yes on the KC's

 

been a while since i been on the thread bro, keep it up, the Harley looks amazing with the 2 piece headlights. you still got the old halo projectors?

 

Yeah I still got them. I was thinking about nite shading them?

So since I got yelled at to go work on my junk, i'll let you in on somethings I've done. J/K



stripped the box, cleaned, painted and polished, drilled and tapped for hydro assist and fully reassembled



with the drop down arm for crossover steering on!



Divorced ford Np 205 32spline with the stock 1350 series yokes, were replaced with some Beef 1410 yokes and flanged yokes, also fixen to twin stick it for independent axle engagement.



forged rods, compared to the ***** factory crap rods

the block is sent off to the machine shop to get freshend up.

thats good for now, im porting the supercharger right now but dont have any pics yet, those will follow

 

the things you find and make use amaze me. Lots of research and time in this sucker but its proving to all be worth it

 

Thanks man. the first time I built it, it only looked badass,

this time around it'll actually be wicked, I can't wait.... and I'm so close,

Things needed...
1. front axle
2. 4) coilovers
3. Rod ends
4. rings, bearings, gaskets
5. upper coilover mounts
6. 1410 driveshafts
7. cable shifters
8. wheels
9. 2" d.o.m. a ***** ton (havent decided if I want to get enough to go full tube yet or not)
10. BS3
11. Intercooler
12. Hydrolic ram, fittings
13. Th400 rebuild kit, jw ultrabell
14. stall converter

And whats sad is... this is a almost done list

anyways looking like i'll have everthing but coilovers, BS3, tube, and converter, by springbreak so it should be sitting on its own.




SS Roll pan,

this is what happens when you mix one of my ideas with a sawzall. lol