When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Probably just the angle of that photo. Here is one with better lighting. I’m presuming that the Raptor was not tinted full windshield.
Originally Posted by blkZ28spt
It must look different in person, because that photo looks like "full windshield tinted" to me. I suppose there's no way to account for the bias of knowing that while looking, though, and 80% isn't a lot
I have a 5% pre cut brow I got on ebay. I bought pre-cuts for all 3 of my rides. It's much easier than trying to cut it nice and straight across the bottom. It's already done for you.
My entire windshield is 80% Huber Optik ceramic film and then there is an eyebrow at the ASI line. If you know your inspection place and are careful, you could still have an inspection sticker. As mine is, you cannot tell that the full windshield is tinted. Wife’s Denali is done like this as well - it makes living in the south much more pleasant on road trips.
The really low tint eyebrows are known as rolling probable cause to those looking to stop you as they are illegal in most states that I know of. For me, I prefer to fly below the radar and not broadcast for a reason to be stopped.
I have a 5% pre cut brow I got on ebay. I bought pre-cuts for all 3 of my rides. It's much easier than trying to cut it nice and straight across the bottom. It's already done for you.
I like your tint. I’ve been wanting to do the brow tint but every example I’ve seen the tint line is “frowning”. I think it looks really out of place but I think it’s just easier to install that way. Your line looks to be level with the horizon. Do you have a link to the precut one you bought.
I stand corrected, drove it yesterday and noticed that the eyebrow is about 1“ below the ASI. If I had noticed that when they did it, I’d have had it redone.
I like your tint. I’ve been wanting to do the brow tint but every example I’ve seen the tint line is “frowning”. I think it looks really out of place but I think it’s just easier to install that way. Your line looks to be level with the horizon. Do you have a link to the precut one you bought.
