Wiring question
#1
Wiring question
I have an 84 150 that had some major wiring issues which resulted in most of the interior harness and dash burn. I also have a 90 donor truck, which I have recently swapped the dash out of. I am installing a Speedway universal wiring harness, and my question has to do with the wiper and heater switches.
Can anyone give me a breakdown of the connections on the backs of these switches? While I have the Haynes manual, which tells you where the wires run, nothing tells me which terminal is, lets say the "hot" terminal on the switch.
I wanted to knock out the wiring first on my rebuild since it is my weakness. I just don't want to lose interest this early in the build. Thank you in advance for any info.
Can anyone give me a breakdown of the connections on the backs of these switches? While I have the Haynes manual, which tells you where the wires run, nothing tells me which terminal is, lets say the "hot" terminal on the switch.
I wanted to knock out the wiring first on my rebuild since it is my weakness. I just don't want to lose interest this early in the build. Thank you in advance for any info.
#2
Ok, so I've pretty much found all dash connections, except the instrument cluster. I have seen some nice diagrams on here for the "C250 and the C251" connectors behind the instrument panel, but none are of a 1990 dash. The plugs are the same, but all colors and wire locations are different. Might be easier if I post this in a different section, but thought I'd try here first.