Originally Posted by TheArtfulPenguin

Something I've been thinking about is:

Why doesn't Ford just enable pushing the camera feeds to a UBS thumb drive. The cameras are already on the vehicle. Why not have an option under camera settings for DashCam Setup to USB. Have a virtual button on the Sync-4 that anytime you have something Dashcam-worthy you hit he button and it saves the last minute of each camera. Or if it detects a crash it does it automatically,

Originally Posted by NEbound

I confirmed that I am an idiot.

Originally Posted by Brad34

LOL Testing incorrectly?

Originally Posted by woodall01

I have the FA200, it works great and was easy to install.

Originally Posted by Brad34

I'm really curious about some of these circuits. My truck does not have a wireless charger or moonroof, but the fuses (#3 & #24) are both present and have constant power. According to the manual, these fuses do not power anything else. It seems that these would be ideal to use for a dash cam, since they apparently aren't powering anything in my truck.

Originally Posted by NEbound

I'm looking at 30 for switched and 3 for constant. Trying to get the blackvue DR750X-2ch installed today.

Originally Posted by Brad34

I'm looking at 3 and 35. I will double check, but I don't think 30 is powered in my truck. If it is I will use that too. Going to install tomorrow hopefully.

I'm using the Littelfuse brand Micro2 add a circuit. The instructions say neither fuse should be over 10a, so that limits where they can go.

Originally Posted by Brad34

There's a 5a fuse in 30 but I don't read any power with the engine on or off.

Originally Posted by Swordmaster

The FA200 is a nice camera also, only difference i see between that and the FA200 PRO is that the PRO rear camera is 1080P