I've searched and can't find any info. Has anyone figured out how to keep the high beams, low beams and fog lights on when high beams are activated?

Is there a plug and play wiring harn av yet?

 

That might be Bambi mode, but I don't think so. I believe Bambi is fogs and highs.

FORScan is what you can use to enable that, but things that make the vehicle illegal can't be programmed (unless Bambi is keeping all 6 on together),

 

what is bambi mode? I dont have forscan yet or a conou to run it. Im new to all this stufd

 

Babmi mode is what the FORScan feature is called.

It allows the highs and fogs to stay on at the same time. I believe the low beams are still off, but I can't remember.
Technically we're allowed to have 4 forward facing lights lit at a time. The modification retains fogs with highs is all. I don't want to say more because I could be mistaken in the detail.

I think they call it bambi mode just because the fog lighs may help to see critters on the side of the road.

 

Yep, you nailed it. I actually just activated and tested it a couple days ago.

Forscan has a giant thread sticky at the top of this forum, can't miss it. You can read all about it and watch the getting started video.

 

Sorta off topic but who writes those codes? Is there any way to have one written to keep the low beams on with the highs and fogs as well?

 

They're not codes, as in rewriting the software, but configuration options. It has to have been coded by Ford for some application, then it can be turned on or off using ForScan.

 

On my 2019 bambi mode has ALL lights on--Lows/Highs/Fogs!! When you go to High beam--