Stifflers traction bars on 2015+ RCSB
#51
TOTM Sept. '18
iTrader: (1)
@BadCon definitely has some great stuff on the forum
https://www.f150forum.com/f123/octan...coyote-451180/
Mike
#52
He sure does....His write up on octane boosters was excellent too.
https://www.f150forum.com/f123/octan...coyote-451180/
Mike
https://www.f150forum.com/f123/octan...coyote-451180/
Mike
The following users liked this post:
TX-Ripper (12-14-2019)
#53
Senior Member
#55
The waiting game
I have been waiting since the announcement 3 months ago......I trade my truck every couple years, and I'm hoping the new kit uses more factory holes. I'll order a set the day they are made.
#57
Senior Member
Finally removed my fx4 blocks and installed the Stifflers bars on my 2019 Ecoboost.
My truck is 4x4 but knowing I was lowering the rear to 4x2 height i ordered 4x2 bars.
I had to drill 2 bottom holes on the drivers side and 3 on the passengers side which required the removal of the platinum power running boards.
Make sure you guys have some cobalt drill bits and some spray paint to touch up.
My truck is 4x4 but knowing I was lowering the rear to 4x2 height i ordered 4x2 bars.
I had to drill 2 bottom holes on the drivers side and 3 on the passengers side which required the removal of the platinum power running boards.
Make sure you guys have some cobalt drill bits and some spray paint to touch up.
#58
Finally removed my fx4 blocks and installed the Stifflers bars on my 2019 Ecoboost.
My truck is 4x4 but knowing I was lowering the rear to 4x2 height i ordered 4x2 bars.
I had to drill 2 bottom holes on the drivers side and 3 on the passengers side which required the removal of the platinum power running boards.
Make sure you guys have some cobalt drill bits and some spray paint to touch up.
My truck is 4x4 but knowing I was lowering the rear to 4x2 height i ordered 4x2 bars.
I had to drill 2 bottom holes on the drivers side and 3 on the passengers side which required the removal of the platinum power running boards.
Make sure you guys have some cobalt drill bits and some spray paint to touch up.
The following users liked this post:
TX-Ripper (01-11-2020)
#59
Senior Member
#60
Senior Member
After going through the install and seeing what had to be done I feel stupid for not buying them sooner
ie my Whipple’d 2018...
ie my Whipple’d 2018...
The following users liked this post:
isthatahemi (01-11-2020)