Does anyone know what blocks these are? Truck came "leveled" by the previous owner, and what I mean by that is reverse raked even worse. I'd like to correct it but truthfully have no idea what was done which is the 1st step to correcting. I tried to jack the front up and measure the spacers. Best I can tell the spacers are sized to give me 1.5" up front. I crawled around some trucks at the dealership and the blocks on my truck are 2+" thicker. I've heard Raptor's have thicker blocks, but I haven't see them before. Are these possibly it?

Anyone know for sure what I'm dealing with?

Thanks,
Shawn

 

Looks a lot like the rough country blocks.

 

Doesn't much matter what they are. Measure them and decide how much you want to lower the rear of the truck and get a new set of blocks and bolts.

 

Also if you measured the front spacers and they are 1.5" thick you probably have a 2.5" leveling kit. It is not a 1:1 ratio for the front lift.

 

Those are ReadyLift 3" blocks, it's what I have on my truck. The factory block is 1" - 1.25", so you have an additional 2" of rear lift.

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1