Upgrading my sub, need a little wiring help

Reply Subscribe

Thread Tools

Search this Thread

Sep 15, 2017 | 08:10 PM

#21

Toovey2v

Thread Starter

Senior Member

Joined: Oct 2015

Posts: 178

Likes: 33

From: Great White North

Got it figured out, when I was looking at the diagram I was looking at the wires on the sub side of the connector, the body side matches the diagram.

Thanks guys!

Sep 16, 2017 | 02:06 PM

#22

Toovey2v

Thread Starter

Senior Member

Joined: Oct 2015

Posts: 178

Likes: 33

From: Great White North

Quote:

Originally Posted by JC-Lariat

No, I ran the 12v supply from pins 5/6 on C3154C to my LOC which had a remote out for the amp.

You could test the audio enable wire and see if it would work though. Connect a meter and see if it gets an actual switched 12v

When you were hooking it up, does your amp turn off with the radio when you open the door? I tapped in to one of them and I have constant 12v from whichever one I went to. I can't remember specifically which pin I went to but it's definitely a constant and not switched.

Reply Subscribe