When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
what are these holes for. doesnt look good on the silver trucks
bottom right two holes
going to use these and attach them to the bolts on each lower corner of the bumpers. paint them black and swap out the amber for red stop/turn/brake lights
I know you guys are all looking at the GM and Ford lights, but this seem to fit the bill as well and only $15. These are only 1" tall, so appears to be a hair taller than the GM unit.
I have no experience with this product so I cannot speak to it's durability, but it certainly seems like it could be a viable option.
I just installed these lights and will confirm that they dont FIT without modiftication. This light is a hair too deep but can be modified by dremeling off the entire edge that goes around the back of the light to make it thinner. I used double sided gorilla tape and it fits and clears the tail gate. These etrailer.com lights are the same as Blazer c513r low profile light that can be bough for $10 at Walmart(I had to order online and ship to store).
