Ford F150 Forum - Community of Ford Truck Fans

Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by: Worksport

Sync 3 Technical Discussion

Thread Tools
 
Search this Thread
 
Old Mar 19, 2018 | 02:18 PM
Share
  #231  
Juanito305's Avatar
Juanito305
Member
 
Joined: Jul 2017
Posts: 66
Likes: 11
Default
I dont, all my packages are non-nav. never thought about downloading anything with nav.
Reply
0
Old Mar 19, 2018 | 02:22 PM
Share
  #232  
Acool's Avatar
Acool
Thread Starter
Senior Member
 
Joined: Nov 2017
Posts: 204
Likes: 98
Default
You need a Nav package. If you can't find 2.2 or 2.3, Download the 3.0 one I linked above, we can prob make it work with that one.
Reply
0
Old Mar 19, 2018 | 02:24 PM
Share
  #233  
Juanito305's Avatar
Juanito305
Member
 
Joined: Jul 2017
Posts: 66
Likes: 11
Default
Cool, downloading now
Reply
0
Old Mar 19, 2018 | 02:38 PM
Share
  #234  
Juanito305's Avatar
Juanito305
Member
 
Joined: Jul 2017
Posts: 66
Likes: 11
Default
Done, now what?
Reply
0
Old Mar 19, 2018 | 02:47 PM
Share
  #235  
Acool's Avatar
Acool
Thread Starter
Senior Member
 
Joined: Nov 2017
Posts: 204
Likes: 98
Default
Ok,

1)extract the NAV install to a USB
2) from one of your Non-Nav packages, find the file GB5T-14G386-SB and copy it to the usb SyncMyRide folder
3) modify the autoinstall.lst to say the following:

Code:
; Prep for installing full package without MEM_ERR03

[SYNCGen3.0_ALL]
Item1 = GB5T-14G386-SB
Open1 = SyncMyRide\GB5T-14G386-SB.tar.gz
Item2 = JR3T-14G391-CD
Open2 = SyncMyRide\JR3T-14G391-CD.tar.gz
Options = AutoInstall,Delay
Then install the USB. If it completes, make sure you reboot the APIM (turn off car, open/close door, let sleep, turn on car)

Once rebooted, install 3.0 Non-Nav as you would normally
Reply
1
Old Mar 19, 2018 | 03:00 PM
Share
  #236  
Juanito305's Avatar
Juanito305
Member
 
Joined: Jul 2017
Posts: 66
Likes: 11
Default
Awesome, thanks, gonna try that now
Reply
0
Old Mar 19, 2018 | 03:41 PM
Share
  #237  
Juanito305's Avatar
Juanito305
Member
 
Joined: Jul 2017
Posts: 66
Likes: 11
Default
Success! Thanks again!
Reply
0
Old Mar 19, 2018 | 03:45 PM
Share
  #238  
ljworcs's Avatar
ljworcs
Junior Member
 
Joined: Jan 2017
Posts: 26
Likes: 0
Default
Originally Posted by Acool
Ok,

1)extract the NAV install to a USB
2) from one of your Non-Nav packages, find the file GB5T-14G386-SB and copy it to the usb SyncMyRide folder
3) modify the autoinstall.lst to say the following:


Code:
; Prep for installing full package without MEM_ERR03. I have a non-nav version of Sync 3

[SYNCGen3.0_ALL]
Item1 = GB5T-14G386-SB
Open1 = SyncMyRide\GB5T-14G386-SB.tar.gz
Item2 = JR3T-14G391-CD
Open2 = SyncMyRide\JR3T-14G391-CD.tar.gz
Options = AutoInstall,Delay
Then install the USB. If it completes, make sure you reboot the APIM (turn off car, open/close door, let sleep, turn on car)

Once rebooted, install 3.0 Non-Nav as you would normally
does this work to clear the MEM_ERR03 error?
Reply
0
Old Mar 19, 2018 | 03:49 PM
Share
  #239  
Juanito305's Avatar
Juanito305
Member
 
Joined: Jul 2017
Posts: 66
Likes: 11
Default
Originally Posted by ljworcs
does this work to clear the MEM_ERR03 error?
Yes, just cleared it on mine. Works flawlessly.
Reply
0
Old Mar 19, 2018 | 03:50 PM
Share
  #240  
Acool's Avatar
Acool
Thread Starter
Senior Member
 
Joined: Nov 2017
Posts: 204
Likes: 98
Default
Originally Posted by Juanito305
Success! Thanks again!
Good to hear!

Originally Posted by ljworcs
does this work to clear the MEM_ERR03 error?
It preps your module so you can then install the latest 3.0 without getting the MEM_ERR03 error
Reply
0



Advanced Search

All times are GMT -4. The time now is 06:18 AM.