Subwoofer tips
On my 13 and 20 I installed 2 sound ordnance subs with amp built in behind the rear seat. All I did was run power wires from the battery to the subs, ran ground wires and tapped into the rear speaker signal. For this you may use a scotch tap but I just peeled a small part of the wire coating off the stock harness, added the signal line wire for the sup and electrical tapped the heck out of it back up.
Trending Topics
You should never cut into any factory wiring. You would get a harness that goes between your head unit and the factory wiring, and make your cabling changes there. Ex, FOR-11CK harness
I suggest using the front speaker to get your signal from for the sub amp.
I suggest using the front speaker to get your signal from for the sub amp.











