Julywizard

I have the second gen LED headlights installed on my truck. Today the PS low beam stopped working. These are the ones without the service panel on the back. Question is if anyone know or have seen the actual led lamp inside those light. Are they the same ones from the first led lights that came on the 15s?
I know I have to undo the whole assembly to change it, but maybe someone can shine some light before I order the bulb which isn’t that cheap. I think tasca has it for about $190. But I am not sure if the 15 bulb will fit in the 16.
Thanks guys

Kingofwylietx

Since these are not bulbs (a maintenance item), I would expect the LED headlights to be covered by the factory warranty. Before giving yourself heartburn, maybe call a couple of dealers to see if they will fix it under warranty.

Julywizard

Well they didn’t come standard on my xlt. So I am not sure they will be under warranty.

antho

Sure it's not the wiring harness for the conversion?

Kingofwylietx

I didn't realize yours were not stock. Since they aren't, I would not expect them to be covered.

Julywizard

Everything else work on that side. Hi beam switch back and turns. I will swap the lights tomorrow just to make sure it’s not the harness. And see what happens

antho

I would do that before anything else. Let us know.

Julywizard

Well do. It’s a matter of taking everything apart AGAIN on both sides lol

Kingofwylietx

Hopefully it's just a loose wire!

Julywizard

Mmmmmm I am not sure about that. I went as far as taking the ballast out of that headlight and plugging it back in and nothin.