Retrofit Power Fold Tow Mirrors to XLT
10-31-2017, 04:55 AM
#1141
I have a 2015 XLT with non-tow, non-power folding, and the 22 pin connector. How much do I need to change to get power fold (and extend?) tow mirrors? I’ve been following this thread for a while but have become lost in all the talk about modules, and 8pin/22pin connectors. I’m just looking for a high level idea of what may be needed now; Re-pin? New modules? New harnesses?
Thanks guys, and don’t try too hard for me, still deciding if I should put this on the wish list or not.
Thanks guys, and don’t try too hard for me, still deciding if I should put this on the wish list or not.
10-31-2017, 12:46 PM
#1143
10-31-2017, 01:10 PM
#1144
I believe post # 1031 has the instructions.
You will need to replace the door modules to BLIS door modules which support power fold.
Last edited by tmcolegr; 10-31-2017 at 01:13 PM.
10-31-2017, 08:01 PM
#1145
10-31-2017, 09:29 PM
#1146
Looks like I have all the parts on there way. I believe I have the physical procedure of changing the parts down. I have a few programing questions if any one could offer some information. When programing the new door modules, am I first recording the information thats on the old ones or am I activating features on the new one which already contain the new features?
I have ordered the OBD plug and a cheap tablet, I have no window products. If any of you guys know some good programming resources that would great.
Thank you.
I have ordered the OBD plug and a cheap tablet, I have no window products. If any of you guys know some good programming resources that would great.
Thank you.
10-31-2017, 10:05 PM
#1147
Looks like I have all the parts on there way. I believe I have the physical procedure of changing the parts down. I have a few programing questions if any one could offer some information. When programing the new door modules, am I first recording the information thats on the old ones or am I activating features on the new one which already contain the new features?
I have ordered the OBD plug and a cheap tablet, I have no window products. If any of you guys know some good programming resources that would great.
Thank you.
I have ordered the OBD plug and a cheap tablet, I have no window products. If any of you guys know some good programming resources that would great.
Thank you.
https://www.f150forum.com/f118/forsc...-truck-348987/
I turned to this when I my dealer (programs in IDS) was unable to reprogram my factory BLIS modules. In addition to activating power fold, I reprogrammed my DRL's, increased count on lane change blinker, and put climate / seats on my touch screen. It really was a snap.
Last edited by Yake Bait; 10-31-2017 at 10:07 PM.
11-01-2017, 04:32 AM
#1148
The difference between the door modules (other than RH vs LH) is the absence of BLIS or having BLIS on the vehicle. You also MUST have the correct door modules for your vehicle's build date.
Only the BLIS door modules contain the drivers for power fold. That's why even if you don't have BLIS, you still need to install BLIS door modules to be able to program the new values to enable power fold. Non BLIS door modules can't be programmed to enable power fold.
11-01-2017, 02:45 PM
#1149
PRICE REDUCED!!! I want to move these! Brand new tow mirrors !! Follow link below.
I have a couple sets of Brand New 2017 Superduty powerfold mirrors forsale for anyone here looking to do the swap They will fit all 2015 - Current F150's :https://www.f150forum.com/f122/2017-...77/?styleid=14
11-01-2017, 09:23 PM
#1150
The difference between the door modules (other than RH vs LH) is the absence of BLIS or having BLIS on the vehicle. You also MUST have the correct door modules for your vehicle's build date.
Only the BLIS door modules contain the drivers for power fold. That's why even if you don't have BLIS, you still need to install BLIS door modules to be able to program the new values to enable power fold. Non BLIS door modules can't be programmed to enable power fold.
Only the BLIS door modules contain the drivers for power fold. That's why even if you don't have BLIS, you still need to install BLIS door modules to be able to program the new values to enable power fold. Non BLIS door modules can't be programmed to enable power fold.