Anyone know how to remove the driver side cab corner?

 

I know they're held on by a type of push pin. Mine popped off after a deer strike. The body shop re-used the part.

 

Yea I was trying to pull it off but didn’t want to break off any tabs

 

I knocked one of mine off with a honda bumper. They replaced it but it looked like it was held in place with the standard ford white clips/ I had posted a link to the video of it in a previoous thread

 

Thanks for the video, same thing happened to me but luckily that little piece took most of the damage.

 

Here is the back of my cab corner from a 2022 F150 XLT crew cab. Please note the additional clip at the very bottom. It’s in addition to the four white clips. Once you release the very bottom clip, you need to lightly pry the whole piece of trim off. If you do break it I found online the OEM piece is roughly 70 bucks at the time of this posting.

 

Looks like the clips slide out the top. Is it better to pull them out away from the truck, or pull the cab corner down so that the clips slip out of position and remain connected to the truck?

 

have to pull out...note there are black "dowels" that wouldn't allow you to pull it down. I used a plastic ply bar, something like these ( ) to gently work them out. If all goes to hell here is the site to buy both the panel and clips if either break on you https://www.fordoempartsdirect.com/v-2022-ford-f-150--xlt--2-7l-v6-gas/body--exterior-trim-cab