Remote start question
I have the remote start on my XLT but can't seem to get the heat to come on full blast when using it. I've tried using the last setting option on the home screen without success. I'll get in the truck and the defrost will barely be blowing. Any ideas?
I turn the fan dial all the way to high and max heat before exiting the vehicle. I also set the remote start to "last setting". Disclaimer: I had to have my 10 year old son sync my phone. So there's a strong possibility of operator error here
That is odd, Ive got mine set to auto and it blasts the def here in MN when its cold out, I even thought the heated seats were one one time but can't be sure. Maybe try setting it to auto but that doesn't explain why manual doesn't seem to be working.
How long after you auto start do you climb in and take off? I've noticed if I've auto started mine and a very short time later I get in the fan is barely blowing. But if I've waited 5 or more minutes it's on max. I believe it waits for the truck to warm closer to operating temp before it turns the fan on high.
From what I've read in the OM, if you don't have Auto Climate Control, the truck itself will go off of how cold it is outside, and turn the heater & seat heaters on accordingly. If the engine is cold, then it won't turn the blower on full so as not to just blow out cold air.
Same if it is hot outside with the A/C.
Same if it is hot outside with the A/C.
Last edited by TerryH22; Jan 22, 2016 at 09:58 AM.
Trending Topics
My truck is set on auto and when I get in about 3-5 minutes after remote started, the defrost is on speed 1 or 2. No seat warmers on. That is with an outside temp of 40. The cab is cool not cold.



