Can the rear camera be reprogrammed so the full screen comes up as the default setting and not the split screen as set from the factory? I know I can get the full screen by pushing the camera button but I would like it to come on in the full screen mode first.

 

not sure about that but I ws wondering if you can turn the lines off that come up to guide you backing up?

 

Yes. Menu -> Vehicle -> Camera settings.

OP - split screen??

 

My camera setting only gives the options of camera delay off or on. Am I missing something? I would love to default to the full screen.

 

You should see options for camera delay on/off, as well as whether you want to enable or disable the 'lines' you see when backing (I like them).

Still not sure what split screen you're seeing. What model/trim F-150 do you have? Can you post a cellphone pic of what it is you see? I have no 'split screen'. I can zoom in (on the hitch ball), or let it default to wide-angle view.

I also enabled the delay, which I like.

 

I have a 15 King Ranch. The split screen shows sides and rear on the right screen and the other half shows the "normal" rear shot. I want the normal full screen rear shot to be the default if possible. I also have the zoom option if I push the camera button twice.

 

I don't thnk you can I have a platinum with just rev camera and it gives full screen

 

OP - I asked this same question a while back. So far no way to get the full screen to come up first as default. I wish we could change in settings which view shows first, back in front.

The full rear view is much better and when using the front camera, the 180 degree view is very helpful, but you have to push the button 3-4 times I believe.

If you find a solution please post and I will do the same.

 

I will try to do this via FORSCAN. My Raptor defaults to the split screen also and the options don't change it...just hitting the button every time. Stay tuned...

 

I tried to change the APIM 7D0-02-01 to every combination listed in the Forscan spreadsheet, I never saw any change regardless of the value of the field....