Hope to get some direction with my problem with my drivers door window. Recently it stopped auto closing. It will close if i hold the button but not auto close. It will auto open but not auto close. So i changed the switch panel that has all the 4 window switches. The auto close worked once then stopped again. I did try re syncing the switch by holding it on up and down but it still will not auto close, any ideas?

 

On my Charger the resync is put the window all the way in whatever direction you are syncing, then let the switch go, then press and hold it again for a couple seconds in that direction. Not sure the F-150 procedure is the same.

 

https://www.f150forum.com/f118/auto-...6/#post5209635

 

That's a great idea copying the manual for this reader as ford does not give manuals anymore. (i have read) I read also you can buy one from the dealer.

 

Anybody can go here and get an Owner's Manual.

https://www.ford.com/support/

 

Thanks 4Rook, i knew the procedure buit i had the door open and that was stopping it from resetting. I have to say it did take3 attempts before it worked so hopefully tomorrow it still works, thanks again for the help!

 

well the reset worked a short time and today I had to reset the auto window up again it worked once then stopped working again. What’s next?

 

Just print 640 pages. I wanted a brochure that the dealers always gave out when looking for a new car/truck. that is about 137 pages..full color... I saved the thread in case I need to print 1 or 2 pages of something in the future.

 

Is the a door module issue because it won’t ho.d the reset programming for auto up for the window?

 

I have determined that if I lower the driver side window to the very bottom it will not auto up. If I go 1” from bottom it retains the auto up feature. It does respond to the reset programming until I lower the window all the way to the bottom, then it needs a reset. Does this mean I have a bad door module or is it a programming issue?