Need EVAP Help

Reply Subscribe

Thread Tools

Search this Thread

May 5, 2025 | 10:31 AM

#11

Padrino797

Thread Starter

Junior Member

Joined: May 2025

Posts: 14

Likes: 2

Quote:

Originally Posted by AppleFordParts

I knew it looked off, this is likely part of your problem. Someone broke the fitting, plugged it with a bolt and added the brass fitting. The one on the brass fitting should be connected as shown below.

That makes so much sense now! Thank you so much for figuring that out! I can’t find that hose on any schematics to save my life. Gonna do a smoke test but I’ll probably end up replacing that tube whether it’s leaky or not. Thank you so much!!! God bless!!

May 5, 2025 | 10:35 AM

#12

AppleFordParts

F150 Vendor

Joined: Jan 2025

Posts: 1,014

Likes: 683

These are the two smaller lines.

https://parts.applefordwhitebearlake...ose-fl3z9g297a

-Steve

__________________
spowell@appleautos.com 1-800-328-9552 dfairbanks@appleautos.com

May 13, 2025 | 04:14 PM

#13

Padrino797

Thread Starter

Junior Member

Joined: May 2025

Posts: 14

Likes: 2

Quote:

Originally Posted by AppleFordParts

I'm sure they did it because that tube isn't cheap, I can do a little better than the price the site shows if you PM me. You can clearly see where the two small hoses connect to this tube in the third photo on our site.

https://parts.applefordwhitebearlake...ube-fl3z9c623c

Thank you so much for the help again. I got a smoke tester but when I first opened it out of the box and filled it, the oil poured straight out the bottom. It did work enough to provide a little bit of air so I tried the soapy water trick while blowing the air and didn't see any bubbles in that area. I'll probably end up replacing that piece though. I'm going to keep investigating and when I fix this and save up more cash I'll definitely pm you and buy it from you. Thank you so much again.

Reply Subscribe