Today it was discovered how to enable Global Windows open/close with FORScan in our F-150s. See the post here for details: https://www.f150forum.com/f118/forsc...8/#post5054511

This mod allows you to use your fob to remotely open/close your front windows. I'm posting this in the main area for those that don't follow the FORScan thread and may be looking for a reason to get started. See post #1 in the FORScan thread for how to get started.

 

There is a lot of pages to read through. What are some other cool functions we can do with the forscan?

 

I have the most popular ones listed here on the "Common" tab but there's many more on the various module tabs at the bottom: https://docs.google.com/spreadsheets...#gid=815852466

 

I have a quick question about this option for my truck it is a 2018 Ford F-150 XTR.

Is there away to change the pattern for this mod as my remote start is lock/unlock and as soon as I press the lock again it will start the truck. Do the same thing again to stop it too.

Any suggestions would be great.

Thanks

 

Seems to me you only need to hit and hold the lock button to close the windows, the unlock you need to press twice.

 

I've tried it a few times but can't get it to work both on my 2019 Raptor and 2020 F-150. Everything else I have done w/ Forscan works great. Makes me wonder if they changed something in the wiring and it only works on earlier trucks.

 

Ok, Perfect I will try that and reply back. Again thank you for the reply.

 

Worked on my 2019.

 

I have a 2020 XLT....had success getting it to work on mine. Keep in mind it is only the front windows.........unlock then unlock again and hold until windows start to go, then you let off the unlock button. Once they start moving you can let off the button and press it again to stop them wherever you want. Same process for going up, just use the lock button.

 

I suggest asking your question in the FORScan thread:
https://www.f150forum.com/f118/forsc...5/#post6611852

They sort of prefer FORScan questions be presented there.
Side note, you're changing DDM/PDM and BCM modules right?
If yes you've done that, hop on over to the FORScan thread and share you concerns.