so, i tried to do the global windows up/down, and that didnt do anything but reverse the button on the drives window?! did i miss something? i did restore everything back to "before i ****ed with it", and it works normal now

 

Are you saying when you push down on the button inside the truck the window goes up? That's a strange one. Try the settings again and make sure to cycle the key on and off. Then close the door set the lock and wait about 1 minute and try again with the FOB. To clarify the FOB, you have to press the unlock button twice while holding down on the second press for about 10 seconds. To raise the window, press the lock button and hold for the same 10 seconds.

 

Yes, you pull up and the window goes down, you push down, and it goes up...odd eh? i tried it twice with the same result.

 

You must have changed something else. Or Ford maybe did, if it's a 2019. You should always state your model year and trim, so people know what you drive. And also state what exact code you had, and how you changed it, for better help. Good luck.

 

2017 f150 XLT, 302a chrome package, towing package, super crew.

follow the tutorial, made backups of everything, changed as directed by the spreadsheet snippet above(left the xxx alone, etc), wrote changes before going to the next module, turned key off/on after each change(as per following the directions on the popup), locked doors, came back about a minute later, pressed unlock, pressed unlock again and held it, nothing happened. went to go role down the window nothing happened, tried to roll up the window, and it went down.

 

That is strange. I have the same 2017 XLT 302A Super Crew and it works perfect

Make sure you are changing 740-05-01 Dxxx xx and not xDxx xx. That will cause the motor to inverse and work backwards

Have you tried holding down the lock button and see if it opens?

 

I'l try it again when it quits raining.

 

Any updates?