FORScan - software to enable/disable features in your truck
Search the IPC spreadsheet (Control+F) here for "tank": https://docs.google.com/spreadsheets...gid=2040827287
Babe, wheres the milk? Right in front of your face!
Thank you again!
Any idea where to look at a way to disable to trailer connection and blindspot unavailable beeps. Drives me crazy I get beeped at everytime I start my truck with my truck camper attached..
Ill poke my head around as well to see what options there are but figured I'd ask the guru.
Last edited by Thuggs; 04-30-2024 at 04:43 PM.
The FORScan Guy
Thread Starter
Any idea where to look at a way to disable to trailer connection and blindspot unavailable beeps. Drives me crazy I get beeped at everytime I start my truck with my truck camper attached..
Ill poke my head around as well to see what options there are but figured I'd ask the guru.
The following users liked this post:
DCM (05-01-2024)
Senior Member
Has anyone tried FORScan v2.4.12 beta yet? I've downloaded it but haven't installed it yet.
Pre collision assist on off pop up
Updated 1/9/19:
For a tutorial on getting started with FORScan, please follow the link below:
https://docs.google.com/document/d/1...it?usp=sharing
For a tutorial on getting started with FORScan, please follow the link below:
https://docs.google.com/document/d/1...it?usp=sharing
any idea how to remove this or how it could have been added?
just pops up for 2 seconds and has no function.
edit: started when I enabled adaptive cruise control. My vehicle doesn’t have it so I then disabled it. However it still threw this message.
Last edited by Stacksonmatt; 05-07-2024 at 08:04 AM.
The FORScan Guy
Thread Starter
No expert here but my guess is you enabled some aspect of pre-collision alert in the IPC, Body Control Module, ABS, APIM or any combination of these. I have a 2018 so I don't have this feature. Maybe you can go back to which ever modules you modified and load the as-built to try to clear it.
Senior Member
iTrader: (1)
The FORScan Guy
Thread Starter
Frelling idiot member
Secondly, it's never a good idea to enable something in software when you know the hardware isn't there to support it.
Suggestion: Install the Adaptive Cruise Control hardware on your vehicle. I did. Change a wiring harness, add the radar transmitter/receiver, change the steering wheel control switch. Drive in a straight line for maybe 30 seconds to calibrate it. Done. Took half a Saturday.
https://www.f150forum.com/f118/adapt...-added-373799/