FORScan - software to enable/disable features in your truck
Senior Member
iTrader: (2)
I am going to guess, and it may well be a bad guess.
When switching on the seats, or if A/C is on the icons are illuminated on top of the SYNC screen. You can press the icon to switch to the climate page. Meaning, you have A/C on, it will display LO if you have it turned to full cold, or it displays the temperature (for both side if you have dual climate control). In addition, if you also have seats on, the seat icon will be displayed next to the temperature number.
It may very well mean that your 'climate menu" is the values I'm talking about.
Or maybe it means you can add climate menu to a SYNC2 screen quadrant.
Where are you getting that value from? I don't see it on the spreadsheet from the link in post #1.
When switching on the seats, or if A/C is on the icons are illuminated on top of the SYNC screen. You can press the icon to switch to the climate page. Meaning, you have A/C on, it will display LO if you have it turned to full cold, or it displays the temperature (for both side if you have dual climate control). In addition, if you also have seats on, the seat icon will be displayed next to the temperature number.
It may very well mean that your 'climate menu" is the values I'm talking about.
Or maybe it means you can add climate menu to a SYNC2 screen quadrant.
Where are you getting that value from? I don't see it on the spreadsheet from the link in post #1.
has left the building
What's the worst that can happen!
EDIT: Well that was uneventful. It only added heated seat icon for SYNC v3.0.
I had it set to heat/cooled/wheel icons but it kept only the heated icons when the values above were input.
I switched it back to my heat/cooled/wheel icons.
Last edited by 16IngotFX4; 06-09-2020 at 12:02 AM.
Frelling idiot member
That worked, thanks. A couple other things I'm wondering:
- Is there a way to make the radio / SYNC 3 stay on when you open the door? It always shuts off when you open the door. There doesn't seem to be a button or way to manually turn it on/off yourself.
- Is there a way to make it let you put on the fog lights alone without any other lights having to be on with it?
Fog lights alone, not sure. Many US states have laws that fog lights can only be functional when low beams are on, so I've never attempted or looked in the spreadsheet for it. My stock halogen fog lights are so wimpy anyway...
Passive entry
I was going to ask if you lost it or if you even had it to begin with since there is an option for the FOB's button in the BCM. So I looked at the spread sheet to find out where that is to help you and sure enough I found that we can disable passive keyless entry, something that I must have over looked several dozen times now. No more triggering door locks at the car wash for me. Thanks... what was I talking about again lol.
thank you
Senior Member
2018 XLT screw with stock halogen bulbs and housings
I know you all have probably explained this 100's of times. I am changing out my front bulbs to all led's (DD SL1 low beam, Sealight high beam, DD fog lights, DD switchback turn signals). I want to change my DRL's to the white part of the switch back and not the low beam. Is that the parking light? Is this what I want to do in Forscan?
DRL - Parking Light only (Halogens) BCM 726-26-02 x1xx xxxx xxxx 726-45-01 xxxx 7Fxx xxxx 726-50-01 108E
Thank you!!
I know you all have probably explained this 100's of times. I am changing out my front bulbs to all led's (DD SL1 low beam, Sealight high beam, DD fog lights, DD switchback turn signals). I want to change my DRL's to the white part of the switch back and not the low beam. Is that the parking light? Is this what I want to do in Forscan?
DRL - Parking Light only (Halogens) BCM 726-26-02 x1xx xxxx xxxx 726-45-01 xxxx 7Fxx xxxx 726-50-01 108E
Thank you!!
Senior Member
That worked, thanks. A couple other things I'm wondering:
- Is there a way to make the radio / SYNC 3 stay on when you open the door? It always shuts off when you open the door. There doesn't seem to be a button or way to manually turn it on/off yourself.
- Is there a way to make it let you put on the fog lights alone without any other lights having to be on with it?
Radio-wise, just open the door, then hit the radio power ****. Should come back on for xx minutes (Stereo Extended Play APIM 7D0-01-01 xx3x xxxx xxxx Stereo Extended Play: A=off, 2=20mins, 3=30mins, 4=40mins, 5=50mins, 6=60mins (Sync 2 & Sync 3))
Fog lights alone, not sure. Many US states have laws that fog lights can only be functional when low beams are on, so I've never attempted or looked in the spreadsheet for it. My stock halogen fog lights are so wimpy anyway...
Fog lights alone, not sure. Many US states have laws that fog lights can only be functional when low beams are on, so I've never attempted or looked in the spreadsheet for it. My stock halogen fog lights are so wimpy anyway...
Senior Member
2018 XLT screw with stock halogen bulbs and housings
I know you all have probably explained this 100's of times. I am changing out my front bulbs to all led's (DD SL1 low beam, Sealight high beam, DD fog lights, DD switchback turn signals). I want to change my DRL's to the white part of the switch back and not the low beam. Is that the parking light? Is this what I want to do in Forscan?
DRL - Parking Light only (Halogens) BCM 726-26-02 x1xx xxxx xxxx 726-45-01 xxxx 7Fxx xxxx 726-50-01 108E
Thank you!!
I know you all have probably explained this 100's of times. I am changing out my front bulbs to all led's (DD SL1 low beam, Sealight high beam, DD fog lights, DD switchback turn signals). I want to change my DRL's to the white part of the switch back and not the low beam. Is that the parking light? Is this what I want to do in Forscan?
DRL - Parking Light only (Halogens) BCM 726-26-02 x1xx xxxx xxxx 726-45-01 xxxx 7Fxx xxxx 726-50-01 108E
Thank you!!
The following users liked this post:
Toolferone (06-09-2020)
Global windows question....
They will not work if the truck has been auto started with the Ford Pass app (currently the only way I have auto start.)
Is this normal, or did I miss something when making the changes?
I just checked, and if the truck is off, they work perfectly. I auto start the truck, and no more workie...???
They will not work if the truck has been auto started with the Ford Pass app (currently the only way I have auto start.)
Is this normal, or did I miss something when making the changes?
I just checked, and if the truck is off, they work perfectly. I auto start the truck, and no more workie...???
has left the building
Global windows question....
They will not work if the truck has been auto started with the Ford Pass app (currently the only way I have auto start.)
Is this normal, or did I miss something when making the changes?
I just checked, and if the truck is off, they work perfectly. I auto start the truck, and no more workie...???
They will not work if the truck has been auto started with the Ford Pass app (currently the only way I have auto start.)
Is this normal, or did I miss something when making the changes?
I just checked, and if the truck is off, they work perfectly. I auto start the truck, and no more workie...???
Yes, remote start. However, the problem with your suggestion is, I only have the ford pass app for remote start, I don't have it on my fob, and I use the scheduled starts feature to start it at the end of my shift everyday. So when I'm walking to it, it has already started, but I am unable to roll down the windows.