Jesse151

Currently using aftermarket ebay antenna and keep getting "navigation fault" messages few times a week. Anyone has any input if changing 7D0-03-01 X*XX XXXX XXXX from roof antenna to other values has any affect? Seems that changing it to 1 - dash antenna, makes it even worse. Any help greatly appreciated

DCM

A word of advice; don't enable the autofold mirrors during the freezing weather months. We've had several reports of trashed mirror fold gears due to mirrors frozen in place and the motor trying to move them.

DCM

Ummmm, Don't use eBay parts? Seriously, I've had poor luck with anything on eBay from China...

Might be a bad ground where the antenna mounts?

PaulProe

Livnitup
Trying to get the new blue theme to work with the Raptor splash screen and not having much luck. I enabled the New Blue GT theme by changing the necessary three codes and it works as it should. I then tried changing the splash screen code to that of the Raptor. The change takes place, but at the same time, the background reverts back to the normal display, not the New Blue

Is there a way to get this with the Raptor splash or is it a lost cause? I was really surprised the splash change over-road the setting for the theme display. But I admit I don't understand all of the Ford coding

Thanks

Paul

Firerunner

iTrader: (3)

You have to use the GT splash screen to use the blue GT Theme. No way around it

BoostedRich

Thank you to all that have put the spreadsheets together, made making changes to my truck yesterday a breeze. However I now seem to have an issue and i'm unsure what I may have done to cause it. Drove in to work this morning after making the turn and parking light the DRL. Turn signal worked perfect and only my parking and turn signal were my DRL.
-->726-45-01 xxxx 7Fxx xxxx
-->726-26-02 x1xx xxxx xxxx
-->726-50-01 08xx
After parking and walking away from the truck I realized after locking the truck the lights were still on. I waiting a few good minutes to make sure there wasn't a long delay, they never went off. I went into the truck and turned the light switch from Auto to Off which then turned them off after locking the truck.

Can anyone think of a reason this may have happened?

DCM

Those numbers worked fine for my 2017, but I have the LED's. Don't you have the halogen headlight bulbs? Some differences, I think, but no clue why it's not working. I know I tried the mod to run the halo's at a brighter setting, but apparently doesn't work with my model year.

BoostedRich

DCM, Yes I do have the halogens. I referenced the tab on an excel sheet which had a draft of headlight settings based off of LED or Halogen. I may see on my Drive home tonight if they stay on once im parked in the driveway. If nothing else ill load the AS BUILT and try again.

DCM

What values do you have in 726-26-01 xxxx xxxx x*xx ?
DRL Conditions Cfg: 0=Option A, 1=Option B
Option A=headlamp switch must be in Auto position for DRLs
Option B=headlamp switch can be in any position for DRLs <-- DRLs don't shut off with this value even when truck is shut down and doors shut

BoostedRich

I will have to check later tonight once I can get ForScan up. It sounds like I may have placed a 1 or option B. Hopefully that will fix it in the event I did make that mistake. On a side note, is the Nav-in-motion a useful feature? I find myself using Wayz more often but will have to track down this code to try.