FORScan - software to enable/disable features in your truck
Senior Member
I do have one other question. I am ultimately trying to keep the White LED Halo and the front turn signal for my DRLs. I can't seem to find a way to make this happen. I can do one or the other but not both. I can get the LED Halo and parking lights, but on the new 2018 stock LED headlights the amber "strip" is so tiny it kind of sucks and the rear tails are on.
Any ideas at all? It's a 2018 Lariat 502a with Stock LED headlights so they seemed to have changed wiring or something on these from the older lights.
Any ideas at all? It's a 2018 Lariat 502a with Stock LED headlights so they seemed to have changed wiring or something on these from the older lights.
Try changing just the line 726-26-02 x1xx xxxx xxxx and nothing else to do with DRLs. That should add the park lights to your DRLs. It’s been awhile since I done an 2018. If that doesn’t work PM me.
It's my first day
Originally Posted by acdii
Something changed with the new headlight design in 18 as I cannot get mine to work the way they did in the 16. I want just the low beams, and when I make any change it errors.
Are they LED or halogen?
I don't understand what you are trying to do or what your old truck was.
Every Canadian vehicle has forced low beams by default. So if that's what you're after, copy the as built data from any Canadian 2018 F150 VIN that matches your trim level.
So this is what i did to get the LED strip and the parking lights but what i was really hoping for was the LED strip and the front turn signals.
So today something weird happened, start stop was disabled by the truck... I shut down the engine manually and started again... still didn't work. Only after a few hours of being parked It started working again normally.
I don't have any mods to disable ***.
*** menu said the following:
Wonder is there is some Forscan we could do to reach this state, BMS was unaffected according to my OBD tool
I don't have any mods to disable ***.
*** menu said the following:
Wonder is there is some Forscan we could do to reach this state, BMS was unaffected according to my OBD tool
The FORScan Guy
Thread Starter
looking for a way to disable the door ajar chime..... key out of ignition door open. needs to be disabled.
also looking for key in ignition door open disable chime. probably the same damn thing.
just reallly hate the chiming when i open my door. especially since its deer season now haha
also looking for key in ignition door open disable chime. probably the same damn thing.
just reallly hate the chiming when i open my door. especially since its deer season now haha
Last edited by Dave__the_ss; 10-19-2018 at 04:05 PM.
I've added perimeter plus to my 2018 500a lariat. I activated remote start via forscan and the truck turns on remotely. What needs to be changed in order to have the climate and heated/cooled seats features of the remote start active?
The FORScan Guy
Thread Starter
If you don't have Heated Steering Wheel then this: IPC 720-02-02 xxxx FBxx
Last edited by Livnitup; 10-19-2018 at 08:52 PM.