FORScan - software to enable/disable features in your truck
#1031
Senior Member
are you using this link?
http://forscan.org/download/FORScanSetup2.3.3.beta.exe
It downloaded fine for me just now
Edit: it looks like they have finally released the beta for the test version that livnitup had posted thus removing the link to the test version.
http://forscan.org/download/FORScanSetup2.3.3.beta.exe
It downloaded fine for me just now
Edit: it looks like they have finally released the beta for the test version that livnitup had posted thus removing the link to the test version.
#1033
LONG TIME FORD GUY
did the LOBO mod... very cool
My camera fail that has been intermittent has apparently failed hard. I had no camera all day today
Have the following DTCs
BCM B115E camera module Bus communication
APIM C1001 vision system camera general electrical fault
Any Ideas??
My camera fail that has been intermittent has apparently failed hard. I had no camera all day today
Have the following DTCs
BCM B115E camera module Bus communication
APIM C1001 vision system camera general electrical fault
Any Ideas??
#1034
The FORScan Guy
Thread Starter
What intermittent issues had you been having and did this start before or after you did any FORScan programming?
#1035
LONG TIME FORD GUY
No it was a couple weeks before I even found out about forscan. Started as a once a week thing and progressively got worse until today ir appears to have died. ran forscan got the DTCs then reset them each time the sync did it's song and dance like after a reprogram. ran the manual tests keeps setting the DTCs so I guess I have a hard failure.
My only concern is if I take it in they will goon up all the changes i put into the APIM AND BCM
My only concern is if I take it in they will goon up all the changes i put into the APIM AND BCM
#1036
The FORScan Guy
Thread Starter
No it was a couple weeks before I even found out about forscan. Started as a once a week thing and progressively got worse until today ir appears to have died. ran forscan got the DTCs then reset them each time the sync did it's song and dance like after a reprogram. ran the manual tests keeps setting the DTCs so I guess I have a hard failure.
My only concern is if I take it in they will goon up all the changes i put into the APIM AND BCM
My only concern is if I take it in they will goon up all the changes i put into the APIM AND BCM
#1037
Junior Member
hello all,
was wondering if there is a way to make the moonroof shade move when the roof is in vent. So when you park you can vent the roof and close the shade and stop it anyplace you want. Right now when you vent the shade moves half way down.
was wondering if there is a way to make the moonroof shade move when the roof is in vent. So when you park you can vent the roof and close the shade and stop it anyplace you want. Right now when you vent the shade moves half way down.
#1038
Senior Member
I would have to double check but I think if you hit the shade button it will stop where it is.
#1039
LONG TIME FORD GUY
If it were me I'd try the tools button in FORScan and do module resets for APIM, FCIM, BCM, IPMB then clear DTCs to see if that helps before involving the dealer. In the service manual those DTCs you listed all seem to suggest checking the wiring connections...have you recently added any aftermarket things to the truck?
Last edited by Texrep; 07-28-2016 at 12:48 PM.