I want to make my truck handle....has anyone tried the Eibach dampers?

Pic for views.

 

Side note...what the wheel/tire specs?
22's with 305/40's?

 

close...


Foose Switch 22s


305/45


Toyo Proxes

 

2 or 4wd?
Sorry...back to your original topic. I haven't tried those...my plan when I can actually get a set is to combine DJM 3" drop control arms with Fox 2.0 coilovers and Fox 2.0's out back. I want the adjustability up front to dial in the ride height I want. I can easily adjust the rear with a small block or longer shackle combined with the McGaughys 4" rear drop. The coilovers seem to be on perpetual backordered though.

 

2WD


I am as low as I want to go...now I just want her to handle. Yeah, I know it is a truck but I know it can be a lot better than it is.

 

You don't have to explain it to me...I've always tried to build handling based trucks. That's why I want to try those coilovers. I'm 46...well beyond wanting to drag my *** everywhere.
I finished this in 2014...a 2012 Ram R/T. Built motor with a Procharger at 10psi on methanol. Full suspension build with 4-link out back. Hellwig swaybars. Adjustable QA1's. Rotora 16" front brakes w/8 piston calipers and 15"/4 piston out back. Billet aluminum front control arms, etc all riding on one-off ADV.1 wheels and 305/35/22 Pirellis.



Don't know how far I'll go with this new truck but we share similar goals.

 

LOL...I am 46 too! With age comes wisdom right?


Your truck sounds like it was badass!!

 

All in it sucked up a $100K bill...stupid is what it was.
Wheels, tires and brakes alone were $19K. lol

 

Will the Eibach struts accept the McGaughys coil drop sleeve?

 

As long as they are stock height. I asked directly from McGaughtys after my 2/4 lowering kit arrived. Prior to this I bought and never installed the belltech 3/5. I may just try to sell the 5" flip kit and use the shocks and struts that came with the belltech. The stock struts and shocks are trash.