DSP-Component speaker Install
Thread Starter
Senior Member
Joined: May 2010
Posts: 385
Likes: 10
From: R2R Texas
DSP-Component speaker Install
ok, so I just finished hooking up my system. Consisted of a parrot harness, jl Audio fix 82, and components to make it short.
After finishing install, I have no output to my passenger side speaker, the rear is fine.
Unfortunately, I did cut the factory harness to grab the Front Right signal to connect to my components crossover,
after hooking the wires back to its original position I still have no output, any suggestions on to what happened?? Possible that I need forscan??
I know it's late but I need help, thanks
After finishing install, I have no output to my passenger side speaker, the rear is fine.
Unfortunately, I did cut the factory harness to grab the Front Right signal to connect to my components crossover,
after hooking the wires back to its original position I still have no output, any suggestions on to what happened?? Possible that I need forscan??
I know it's late but I need help, thanks
Thread Starter
Senior Member
Joined: May 2010
Posts: 385
Likes: 10
From: R2R Texas
Update*
checked continuity for any breaks on the lines, found everything intact.
The headunit fails to output any type of signal to the Right Front speakers
I also lost chimes.
Any help???
checked continuity for any breaks on the lines, found everything intact.
The headunit fails to output any type of signal to the Right Front speakers
I also lost chimes.
Any help???
I've also just installed an amp this weekend and also lost chimes. There is a Forscan fix posted in the audio section. Ordered my Forscan adapter today on Amazon. Looks like I'm gonna have to learn Forscan this week. Let us know if you find another fix for the chimes.
Thread Starter
Senior Member
Joined: May 2010
Posts: 385
Likes: 10
From: R2R Texas
Just returned to raise the windows about an hour later.
Had disconnected the battery, after connecting, my chimes have returned, however, they are loud.. lol doesn't bug me as much as still not having ANY output to my Right Front speakers.
Crossing my fingers and hoping this is fixed by the morning, I'm sure the system is sensing a problem
Had disconnected the battery, after connecting, my chimes have returned, however, they are loud.. lol doesn't bug me as much as still not having ANY output to my Right Front speakers.
Crossing my fingers and hoping this is fixed by the morning, I'm sure the system is sensing a problem
5 Year Member
Joined: Nov 2011
Posts: 62
Likes: 13
From: Erial, NJ
Just returned to raise the windows about an hour later.
Had disconnected the battery, after connecting, my chimes have returned, however, they are loud.. lol doesn't bug me as much as still not having ANY output to my Right Front speakers.
Crossing my fingers and hoping this is fixed by the morning, I'm sure the system is sensing a problem
Had disconnected the battery, after connecting, my chimes have returned, however, they are loud.. lol doesn't bug me as much as still not having ANY output to my Right Front speakers.
Crossing my fingers and hoping this is fixed by the morning, I'm sure the system is sensing a problem
Trending Topics
Thread Starter
Senior Member
Joined: May 2010
Posts: 385
Likes: 10
From: R2R Texas
Trucks up and running. Just need to tidy up the doors.
on another note, I lost my chimes again. Lol
thanks again!!!
My chimes take about 3-4 seconds to start through the speakers now. Maybe my amp is delaying the speaker startup. Also, I've now lost all backup sensor beeps. Nothing at all. I'm confused about that one. Not sure why new amp would affect that.
Thread Starter
Senior Member
Joined: May 2010
Posts: 385
Likes: 10
From: R2R Texas
just got around to starting the truck. Battery went dead since my last post. Will drive around the city for a few to see what's missing, still no chimes though. Sorry. Hopefully someone else replies with a fix