BLIS with trailer
Thread Starter
Junior Member
Joined: Sep 2020
Posts: 22
Likes: 1
From: NM
BLIS with trailer
I pulled a trailer for the first time last week with my 2018 (8x24). It recognized the trailer and asked if I wanted to set up BLIS. I said yes and confirmed the trailer size. After that I figured the BLIS disabled light on the dash would go out and the BLIS would work. No such luck. I pulled a little utility trailer today with the same results. Any idea what I am doing wrong?
Thanks
Thanks
Senior Member
Joined: May 2018
Posts: 517
Likes: 159
From: Greensburg,PA
You have to go into the menu and have it activated despite what the trailer set up tells you.
Its in here about having to re select BLIS in the trailer menu and make sure to pick that trailer once you connect it back up and it should work
https://www.f150forum.com/f118/trail...luster-423683/
Its in here about having to re select BLIS in the trailer menu and make sure to pick that trailer once you connect it back up and it should work
https://www.f150forum.com/f118/trail...luster-423683/
In addition to doing the trailer setup process....go to the settings tab and make sure that trailer blind spot is checked. I had this same issue and just discovered this secondary setting today.
Last edited by Bluewoo; Nov 6, 2020 at 06:31 PM.