Resurrecting this threat to ask a question.

I found 8C3Z-99286D88-A for the bed extender mounting bolt.
However those are steel bolts for the 2009-2013 model, even though they look identical to the 2015+ bed extender bolt, but I am not sure they are the correct ones for the Aluminum body!

Anyone know if there is an aluminum bolt equivalent available that replaced the steel ones?

 

I am wondering about this too. I have the T50 bolts but nothing else. Older threads mention sleeves and bushings but I’m not sure if these apply to the 2015+ version. Can’t find anything either way. Does anyone have this bed extender and can comment on how many pieces come with?

 

XX3Z-99286D88-A comes with one T50 bolt and it's plastic sleeve. The bushing is YL3Z-84286A54-AA there is 1 per package so you need 4 of them.

I am still researching the correct bolt part number for the 15+ F150, so far, no luck.

 

I lucked out and found the parts bag from a kit on eBay for $50!!!

FL3Z-99286A40-C-SUB1
Contains:
- Two T50 bolts
- Two plastic bolt sleeves
- Four pin bushings
- Four bumpers for use with bedliner

 

I moved my bed extender from my 2009 Lariat to my 2016 Platinum a few months ago using the original steel bolts from the 2009. When installing, I applied a thick coat of anti-seize compound to the bolt threads to help isolate the dissimilar metals. Prior to using the steel bolts, I also researched and was unable to come up with a different part number for a 2015+ truck. If anyone has an updated part number, please post it. Thanks.

 

After posting this, I checked the density of the old and new bolts (mass divided by volume), they are the same density. My best guess is that they are the same bolt as the one I took off my 2013.

 

How did you get the original bolts out? I am trying to move mine from 2008 Lariat to my 2019 XLT.

 

I took my extender off my 14 and use it on my 19.

 

How did you get the original bolts out? I am trying to move mine from 2008 Lariat to my 2019 XLT.