Anyone thought of adding 4A to XLT?
The following users liked this post:
brandon\ (11-12-2019)
#143
Senior Member
#146
Senior Member
Yipeekyay funnyman06 ... I can imagine the feeling of satisfaction rushing through your mind right now, Merry Antecipated X-mas!!
Holy cow, man, even I am excited for your accomplishment and it does nothing for me lol!
Enjoy the 4A , hope it serves you better than it does me!
Holy cow, man, even I am excited for your accomplishment and it does nothing for me lol!
Enjoy the 4A , hope it serves you better than it does me!
The following 2 users liked this post by WildernessLVR:
funnyman06 (12-11-2018),
isthatahemi (12-18-2019)
#147
Senior Member
So the process of installing the transfer-case is pretty straight forward. I took a few photos but I don't think I'm going to get too crazy, the forum makes me resize every photo i take and its annoying. But basically you lift the truck up, remove the driveshaft, unhook the front drive shaft and remove if you can. I did not and at times it was a PITA and in the way. Hold up the transfer-case with a tranny jack and drop the crossmember. Now the fun begins, while holding the transfercase up, unbolt it from the back of the transmission. 2 of these are a HUGE pain. To get the top 2 out I used a stubby ratchet and had just enough space to break it free, then I undid them with my fingers. Once its unbolted its just a matter of pulling it off the output shaft, spinning the transfercase 90 clockwise and dropping it. This is where a second person really comes in handy. The transfercase is only around 50lb but its extremely awkward and I would not want to drop that aluminum housing on the ground, it would likely shatter. The install is just the opposite.
The following 3 users liked this post by bsedwebt:
#149
Senior Member
Last edited by funnyman06; 12-11-2018 at 07:26 PM.
The following 2 users liked this post by funnyman06:
brandon\ (11-12-2019),
WildernessLVR (12-11-2018)
#150
Senior Member
Yipeekyay funnyman06 ... I can imagine the feeling of satisfaction rushing through your mind right now, Merry Antecipated X-mas!!
Holy cow, man, even I am excited for your accomplishment and it does nothing for me lol!
Enjoy the 4A , hope it serves you better than it does me!
Holy cow, man, even I am excited for your accomplishment and it does nothing for me lol!
Enjoy the 4A , hope it serves you better than it does me!
Its been a long slow process, 2 years in the making but I'm glad to finally have it done. At this point, even if I hate it I'm not saying a damn thing!!!! I was seriously watching my email all day waiting for the delivery confirmation to come from FedEx. Im glad I took the time this past weekend to go ahead and install it even though I was missing the right controller. I was just going back through the post and I cant even believe we started talking about this is Dec of 2016.
The following users liked this post:
WildernessLVR (12-11-2018)