Adaptive Cruise Control *Added*
#871
Senior Member
Oh ok sorry I thought you were including this firmware version. Ok folks let’s get to the bottom of this one for stop and go. Please help if you can with firmware (FL3T-14D049-AE) higher than mine on your CCM.
#872
Can someone here with a 2017 CCM module try the following change in CCM and let me know if it brings your truck to a complete stop when the vehicle in front of you comes to a stop while ACC is on & engaged? I'm trying to narrow some things down by firmware revision levels and this would help out a lot. Thanks
764-01-01 xxxx x2xx xx
764-01-01 xxxx x2xx xx
The following users liked this post:
Livnitup (11-07-2017)
#873
The FORScan Guy
764-01-01 0412 0201 xx
#874
With both forscan changes in the CCM, the ACC slows at a stop light and I get the beep beep, distance bars turn yellow and shuts off at 12 mph. Also with the second forscan change, when I get close to a car that is in front of me the middle six lights on my collision warning light up without any beeps and stay on until my distance with the car in front of me increases.
The following users liked this post:
Livnitup (11-07-2017)
#875
Senior Member
#876
The FORScan Guy
With both forscan changes in the CCM, the ACC slows at a stop light and I get the beep beep, distance bars turn yellow and shuts off at 12 mph. Also with the second forscan change, when I get close to a car that is in front of me the middle six lights on my collision warning light up without any beeps and stay on until my distance with the car in front of me increases.
#878
Awesome, thanks! If that value alone doesn't work, could you also try this?
764-01-01 0412 0201 xx
764-01-01 0412 0201 xx
Change #2 - front sensor not aligned
Calibration - FL3T-14D050-AF
The following users liked this post:
Livnitup (11-07-2017)
#879
Senior Member