Adaptive Cruise Control *Added*
#771
Senior Member
iTrader: (4)
The plastic insert was separated before it was sprayed, so I can still remove it. Looks like I might have to put some serious thought into doing this. Especially with it all done with FORSCAN mods. Thanks to all who contributed to this thread. Looks like a fun little project.
That plastic piece runs about $40, I looked at them previously because mine has a small crack in it.
The mod is simple with the exception of running the harness, which requires you to remove the bumper. That is not hard, just aggravating. If you can get someone to help with this step, I would.
The following users liked this post:
vtn98 (09-27-2017)
#774
I can assure you the Forscan mods are the easiest part.
That plastic piece runs about $40, I looked at them previously because mine has a small crack in it.
The mod is simple with the exception of running the harness, which requires you to remove the bumper. That is not hard, just aggravating. If you can get someone to help with this step, I would.
That plastic piece runs about $40, I looked at them previously because mine has a small crack in it.
The mod is simple with the exception of running the harness, which requires you to remove the bumper. That is not hard, just aggravating. If you can get someone to help with this step, I would.
It looks very doable, I just need to decide when I want to do this. I still need to do lift/level and wheels/tires! This site is expensive...
#776
Senior Member
So I installed the 302A harness today. I can't locate the plug for the collision warning sensor. Any help with where it is would be appreciated. Also, is it necessary to do this?
Thanks.
Thanks.
#777
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
#779
Senior Member
#780