2019 Adding Adaptive Cruise
#72
Senior Member
I wanted to confirm my 2018 Lariat with 502a was able to successfully add Lane Keep using only Forscan.
Both the Alert and Aid functions are working.
Here are the asbuilt values used.
IPC: 720-02-01 xxEx xxxx xxxx
IPMA: 706-01-01 xxxx x94x xx92
PSCM: 730-02-01 xxxx x1xx x1xx
After configuring the asbuilt.
Perform the calibration using Forscan service procedure for IPMA module.
Both the Alert and Aid functions are working.
Here are the asbuilt values used.
IPC: 720-02-01 xxEx xxxx xxxx
IPMA: 706-01-01 xxxx x94x xx92
PSCM: 730-02-01 xxxx x1xx x1xx
After configuring the asbuilt.
Perform the calibration using Forscan service procedure for IPMA module.
Last edited by tonesto7; 11-04-2019 at 01:59 PM. Reason: better clarity
#74
Senior Member
I wanted to confirm my 2018 Lariat with 502a was able to successfully add Lane Keep using only Forscan.
Both the Alert and Aid functions are working.
Here are the asbuilt values used.
IPC: 720-02-01 xxEx xxxx xxxx
IPMA: 706-01-01 xxxx x94x xx92
PSCM: 730-02-01 xxxx x1xx x1xx
After configuring the asbuilt.
Perform the calibration using Forscan service procedure for IPMA module.
Both the Alert and Aid functions are working.
Here are the asbuilt values used.
IPC: 720-02-01 xxEx xxxx xxxx
IPMA: 706-01-01 xxxx x94x xx92
PSCM: 730-02-01 xxxx x1xx x1xx
After configuring the asbuilt.
Perform the calibration using Forscan service procedure for IPMA module.
#75
Senior Member
I wanted to confirm my 2018 Lariat with 502a was able to successfully add Lane Keep using only Forscan.
Both the Alert and Aid functions are working.
Here are the asbuilt values used.
IPC: 720-02-01 xxEx xxxx xxxx
IPMA: 706-01-01 xxxx x94x xx92
PSCM: 730-02-01 xxxx x1xx x1xx
After configuring the asbuilt.
Perform the calibration using Forscan service procedure for IPMA module.
Both the Alert and Aid functions are working.
Here are the asbuilt values used.
IPC: 720-02-01 xxEx xxxx xxxx
IPMA: 706-01-01 xxxx x94x xx92
PSCM: 730-02-01 xxxx x1xx x1xx
After configuring the asbuilt.
Perform the calibration using Forscan service procedure for IPMA module.
How do you enable without the button, does it show up somewhere else?
#76
Senior Member
I will take some pictures once I have a minute. I'm flashing an update to the IPMA at the moment so I have to wait about 20 more minutes.
FYI: The settings for Lane Keep are on the page where you disable auto high beams and blind spot
FYI: The settings for Lane Keep are on the page where you disable auto high beams and blind spot
The following users liked this post:
Bob_Mac (11-05-2019)
#77
Senior Member
Thanks, looking forward to seeing them.
#78
Senior Member
Like stated the settings are there when enabled but it does not show lines on a drive. Is there a different camera in the 19, one for lane keeping different possibly
#79
I am wondering if the Lane Keep topic should be moved to its own thread since it has nothing to do with Adaptive Cruise Control and if anyone that is looking for this would be able find it/follow it.
The following users liked this post:
tonesto7 (11-06-2019)
#80
Senior Member
Last edited by Bob_Mac; 11-06-2019 at 06:17 AM.