Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

Speedo and Odometer quit at the same time!

Thread Tools
 
Search this Thread
 
Old Apr 2, 2012 | 09:20 PM
  #11  
fastpakr's Avatar
Senior Member
 
Joined: Jan 2010
Posts: 466
Likes: 1
From: Roanoke, VA
Default

FYI, if you're comparing prices between Advance and Autozone, don't forget to use coupons. Not sure what Autozone has, but Advance has a ton.
Reply
Old Apr 2, 2012 | 09:37 PM
  #12  
GreenMasheen's Avatar
Senior Member
 
Joined: Mar 2012
Posts: 144
Likes: 2
From: Eatonville Washington
Default

My speedo and mileage go all the time if its rainy i think that cable you were talking about is shorting out on my 1992 five speed. no reverse lights either.
Reply
Old Apr 5, 2012 | 12:02 AM
  #13  
agent007ppk's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2012
Posts: 26
Likes: 0
Thumbs down

Well I replaced the rear speed sensor. No luck. So I replaced all the fuses as well and it's still broken. I also noticed that my ABS light comes on before I start the truck. Some please tell me what the heck is going on.
Reply
Old Apr 5, 2012 | 08:13 AM
  #14  
th25's Avatar
Executive Member
 
Joined: Nov 2010
Posts: 5,291
Likes: 18
From: Iowa
Default

Did you check to wires going to the vss to make sure theres no breaks?
Reply
Old Apr 5, 2012 | 01:31 PM
  #15  
agent007ppk's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2012
Posts: 26
Likes: 0
Default

No breaks that I could see. I am assuming that the cluster is bad. I do remember that lately the Reset and Trip buttons have been acting very unresponsive. Hopefully it's the cluster.
Reply
Old Apr 5, 2012 | 01:36 PM
  #16  
fastpakr's Avatar
Senior Member
 
Joined: Jan 2010
Posts: 466
Likes: 1
From: Roanoke, VA
Default

Are you sure it's actually connected securely into the back of the cluster?
Reply
Old Apr 5, 2012 | 02:58 PM
  #17  
agent007ppk's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2012
Posts: 26
Likes: 0
Default

Yeah connections are clean and secure. So I pulled a cluster from a 94. Is there any difference or mods required?
Reply
Old Apr 5, 2012 | 06:10 PM
  #18  
agent007ppk's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2012
Posts: 26
Likes: 0
Default

So if I swap the cluster, and it still doesn't work, then what could it be? I checked fuses, and replace the rear diff sensor. Any other thoughts? Thanks everyone.
Reply
Old Apr 5, 2012 | 10:59 PM
  #19  
agent007ppk's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2012
Posts: 26
Likes: 0
Default

Well I swapped the cluster. The cluster I got from works fine, except the volt meter. Can I switch the panels between the 2; stock and the donor? Also, ABS light is on all the time now. Any thoughts?
Reply
Old Apr 5, 2012 | 11:06 PM
  #20  
Just call me Sean's Avatar
We'd do it
Supporting Member

iTrader: (1)
 
Joined: May 2008
Posts: 35,602
Likes: 459
From: Orlando,Fl.
Default

Yea, the '94 cluster is different than yours. It can be made to work if you switch around some wires. If you don't want to trace the printed circuit boards then search the site, the differences have been posted.
Reply



All times are GMT -4. The time now is 08:55 AM.