Ok I am removing my fuel injectors on my 1992 300 and I can't figure out how to de pressurize the fuel system? How do I go about doing this? And will injectors out of a 4.6 v8 work? They came out of a 1996 mustang gt.

 

Why are you replacing them?

To depressurize the system, you need to find the schroder valve on the fuel rail (looks like a tire valve) and press the button in the middle like letting the air out of a tire

 

#3 and 5 injectors don't put out any fuel

 

Put a rag or something over it when you do it. Its gonna spray pretty hard for a second or two.

 

first off how do you know it is the
#3 and#5 injectors?

the 300 is a batch fire system. fires all 6 at the same time everytime.

second. you have to use injectors for the 300. they run a low pound injector. something like 12 or 14 pound injectors. grey tops.

 

its a 14lb injector the 302 and 351 is a 19lb

 

oh and the 4.9 fires injectors 135 at once and the than the other 3, i gotta pin-out lol

 

i almost knew it was a 14lbs but without looking it up i didnt want to give the wrong info.
thanks

 

They have spark so I started it and put a flammable vapor sensor thing I stole out of my work truck and stuck it by the hole and no reading put it by a firing one and a reading. They look kinda a vanilla color not grey.

 

yeah they will fade out and look like that. but trust me at one time they were grey lol


here is a link to the colors and pounds for the factory ford injectors.
http://www.fordfuelinjection.com/?p=38