Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

problem 89 ford f150

Thread Tools
 
Search this Thread
 
Old Apr 9, 2010 | 07:40 PM
  #1  
gemster's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2010
Posts: 2
Likes: 0
Default problem 89 ford f150

i bought a 89 ford f150 awhile ago cause i just loved that year untill this problem i havent been able to figure out with the engin idle my fuel pressure is 30 lbs when i rev the eingin up it drop down to around 10-12 ibs. i change the fuel pumps filter and everything else i drive down the road and go to press on the gas and it cuts out jumps sputer and the whole nine yards untill i back off the gas dose any one have any ideas. its the 5.8 litter automatic and of course 4 wheel drive
Reply
Old Apr 9, 2010 | 08:14 PM
  #2  
ymeski56's Avatar
Senior Member
Supporting Member

 
Joined: Jul 2008
Posts: 58,557
Likes: 1,165
From: Long Beach Calimexifornia
Default

Originally Posted by gemster
i bought a 89 ford f150 awhile ago cause i just loved that year untill this problem i havent been able to figure out with the engin idle my fuel pressure is 30 lbs when i rev the eingin up it drop down to around 10-12 ibs. i change the fuel pumps filter and everything else i drive down the road and go to press on the gas and it cuts out jumps sputer and the whole nine yards untill i back off the gas dose any one have any ideas. its the 5.8 litter automatic and of course 4 wheel drive
You changed the filter & the pumps? If so which pumps? Would you like to borrow some commas & periods? I think I may even have a question mark & an exclamation mark I'm not using! You're on your own as far as grammar. "Hacker! I think my ears are bleeding again!"<Side Joke-<

Last edited by ymeski56; Apr 9, 2010 at 08:18 PM.
Reply
Old Apr 10, 2010 | 08:57 AM
  #3  
gemster's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2010
Posts: 2
Likes: 0
Default

I changed the intank pumps, also i changed the pump on the fram, and the filter, and the fuel pressure reglator. none of it has seemed to help. i hooked it up to the scanner and no codes. it ideals fine and drives fine untill you really hit the gas. It jerks sputters and acts like there no gas when you hit higher rpms. Around 2200 to 2300 rpms so i am clueless.
Reply
Old Apr 10, 2010 | 09:20 PM
  #4  
Just call me Sean's Avatar
We'd do it
Supporting Member

iTrader: (1)
 
Joined: May 2008
Posts: 35,602
Likes: 459
From: Orlando,Fl.
Default

Did you check the dual function reservoir? Single function reservior for single tank trucks.
Reply




All times are GMT -4. The time now is 07:00 PM.