I was told that the steering pumps on the e series vans are commonly less likely to whine and make noise. So my question is the line hook ups. There in diffent places. How could I make this pump work on my f150.

 

As far as I know they should hook right up if you get the same engine.

 

Honestly every ford you hear except the new ones whine. I got a new one from my shop teacher and after a month it's started whining. But the e series should work fine I think.

 

the E series use a GM Saginaw steering pump and yes they are tons better.... just get the pump and lines...

I think Just Call Me Sean did the swap and I think you need to have a shop adapt the end going to the Saginaw pump to those of our trucks... I'd PM him to have him post that info here for others to read

 

Use the van high pressure line too and it bolts right in. I'll have to link my write up later.

 

Here you go:

https://www.f150forum.com/f10/f150-g...upgrade-56757/