low range does not engage
Originally Posted by Execut1ve
on my dash cluster I have only a 4x4 light, I mean the lo range button and the red LED next to it are always lit while the 4hi button is only lit when in 4wd
sounds stupid but worth a try. mine does same thing but i figured it out. put it in 4HI...drive forward a little....stop....(keep foot on break entire time)....put it in neutral for a sec.....then into reverse.....then neutral again....now hit the 4LO button and see if it works.....sometimes the internals of the tcase needs the pressure takin off them.......
LET ME KNOW IF IT WORKS!!!
LET ME KNOW IF IT WORKS!!!

