Keep blowin fuse as soon as intouch the brake pedal
02-21-2013, 10:20 PM
#11
Senior Member
Thread Starter
Originally Posted by Just call me Sean
Probably the wire from the brake switch to the turn signal switch. Otherwise the hazards would blow a fuse too.
02-22-2013, 12:23 AM
#13
Both the blinkers work, and when I turn the head lights on the tailights come on also. When I pull my trailer however, the right turn signal works fine, but when I turn the left signal on, it does not blink, it just stays lit both on the truck and trailer. That only happens when the trailer is hooked up though.
I pull the trailer on other trucks and those all work fine.
I pull the trailer on other trucks and those all work fine.
Last edited by Ford 4x4; 02-22-2013 at 12:24 AM. Reason: Put right twice instead of right and left
02-22-2013, 12:44 AM
#14
Both the blinkers work, and when I turn the head lights on the tailights come on also. When I pull my trailer however, the right turn signal works fine, but when I turn the left signal on, it does not blink, it just stays lit both on the truck and trailer. That only happens when the trailer is hooked up though.
I pull the trailer on other trucks and those all work fine.
02-22-2013, 10:24 AM
#16
One thing I know from working on simi trailers is that if there is not a good ground going through the trailer connection, the current is going to attempt to find a ground of its own. I have had many drivers think I was some kind of wizard when I fixed their problem in a matter of minutes. A bad or lifted ground will cause your marker lights on a trailer to blink along with the turn signals.