Ok I need to tighten the inner pivot bolt(s) on my 95' F150 2wd and I don't know where they are or what to look for. Help me!!

 

inner piviot bolt . . . explaine on the suspention are you talking about the axle beam bolt for the hub asemb etc ya got me lost hear

Tom

 

I've got I beam suspension. I've got a little shake when I turn left while going down the road. The last time this happened they, "tightened the inner pivot bolt(s)". I'm sorry I don't do anything with front end sh*t, so I'm kinda confused myself.

 

sounds like the bolt for the i beam where the hub joins but shakes cause it gets lose it shouldnt get lose so something is out of wack maybe an unbalnced tire or improper alighnment

 

Wheres that located?

 

ok behind the tire behind the rotor the beam conects from the middle of the engine saport to the hub which theres a bolt or 2 straight up and down that conects the hub to the beam

 

Thanks I'll check it out.

 

ok i decided to look at my truck and its got the stabliser conected to the i beam which is one bolt drops through then the i beam conect to the hub with 2 bolts that hold in the ball joints so i have know clue where your looking for if i had to take a guess it be the bolt for the stablizer